Lucent Technologies 108488222 manual Wall Installation, Removing the Desktop Stand

Page 16

CALLMASTER® V Telephone Console User’s Guide 555-233-735

Issue 1

Telephone Installation

12

 

 

Wall Installation

Note: For wall-mounting, you will need a 1-foot line cord. (This cord is not

supplied with the telephone, but can be ordered by using this comcode: 103786760.)

1.Make sure the 8-conductor wall mount plate is in place.

2.Place the telephone face down on a flat surface.

3.Remove the desktop stand which is attached to the base of the telephone by tabs on the top and back of the stand, shown as 2 and 6 in Figure 4.

—Press inward on the top of the stand until you can lift the upper tab(s) of the stand (shown as 1 in Figure 5 below) out of the tab slot(s) (shown as 2 in Figure 5 below) on the telephone.

—Lift the bottom of the stand out of the lower tab slot(s).

1

3

2

4 2

FIGURE 5 Removing the Desktop Stand

4.Snap the line cord into the “LINE” jack in the bottom of the telephone.

5.Reverse the desktop stand so that the larger end is facing down and coil the excess line cord in the back of the deskstand.

6.Engage the upper tabs (1 in Figure 5) of the deskstand into the slots

(4 in Figure 5). Slowly lower the reversed deskstand onto the bottom of the telephone until the lower tabs (shown as 3 in Figure 5) snap into the appropriate slots on the bottom of the telephone (2 in Figure 5).

7.Install two screws (part of Kit #108170366 that is packaged with the telephone) to fasten the base to the bottom of the telephone. See Figure 6 for the location of the two areas in which these screws must be installed.

8.Place the free end of the line cord through the opening in the middle of the deskstand and then snap the free end of the line cord into the wall jack.

9.Place the base of the telephone on the wall-jack mounting studs, and

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Callmaster V Telephone Console User’s Guide Callmaster V Telephone Console User’s Guide To Order Copies of this DocumentIii UseService Callmaster V Telephone Console User’s Guide Issue Callmaster V Telephone Console, Front ViewHeadset Connections with the Callmaster Headset On/Off buttonCallmaster V Recorder Interface SoftkeysCall-Handling Features Other Softkey Features That May Be On Your DisplayHeadset ON/OFF To turn on your headsetHold ConferenceRedial To disconnect from a call ReleaseTo turn off the speaker and return to headset use Getting Messages TestTransfer MessageVoice and Display Features Selecting a Personalized RingSelect Ring To select a personalized ringing patternTelephone Installation Operating Range RequirementsImportant Safety Warnings for Installation Pin Pair Name DescriptionDesktop Installation Wall Installation Removing the Desktop StandInstalling the Designation Card Placing the Telephone on the Wall Jack Mounting StudsOrderable Cards and Equipment Following cards and equipment are orderable

108488222 specifications

Lucent Technologies, a prominent name in the field of telecommunications, has made a significant impact with its innovative solutions and technologies. With the model number 108488222, the company has introduced a groundbreaking product that reflects its commitment to advancing communication systems.

One of the main features of the Lucent Technologies 108488222 is its robust performance. Designed to handle high volumes of data transmission, the 108488222 facilitates seamless communication across various platforms. This capability makes it an ideal choice for both large enterprises and service providers looking to improve their operational efficiency.

The 108488222 is equipped with cutting-edge technologies that enhance its functionality. For instance, it utilizes advanced signal processing algorithms, which play a crucial role in optimizing data flow and reducing latency. This allows for real-time communication, making it particularly suited for applications that require instant feedback, such as video conferencing and online gaming.

In addition to its high-performance capabilities, the Lucent Technologies 108488222 emphasizes scalability. Its modular architecture enables organizations to expand their systems as needed, without significant overhauls. This adaptability is particularly important in a technology-driven environment where demands can shift rapidly.

Security is another key characteristic of the 108488222. In today's digital landscape, protecting sensitive data is paramount. Lucent Technologies has integrated advanced encryption protocols within the 108488222, ensuring that all communications remain secure from potential threats. This focus on security provides peace of mind for businesses that rely on the integrity of their data.

Moreover, the 108488222 is known for its user-friendly interface, allowing administrators to easily manage and monitor network performance. This intuitive design lowers the barrier for entry, enabling organizations to maximize their use of the technology without the need for extensive training or technical support.

In conclusion, the Lucent Technologies 108488222 stands out due to its robust performance, advanced technologies, scalability, security features, and user-friendly design. As communication needs continue to evolve, products like the 108488222 will remain at the forefront of enabling efficient and secure telecommunications.
Top Page Image Contents