Making a Call
1.Press O.
2.If desired, press "to move the Selection rectangle; then press ' corresponding to the line you want.
3.Dial the call.
4.To end the call, press O.
Answering a Call
1.Press O.
2.Speak into the handset.
3.To end the call, press O.
Preselecting a Line or Button
Once Line Preselection is enabled, proceed as follows:
1.If the display is blank, press ".
2.If necessary, press "to move the Selection rectangle.
3.Press 'corresponding to the line or button you want.
4.Press Oto access the line or button.
Changing Settings or Performing Tests
in Local Mode
1.Make sure the handset is turned off.
2.Press and hold "for 3 seconds.
3.While still holding ", press O.
4.Press one of the following:
A (2) to enable or disable the alerter.
P (7) for 3 seconds, then "to enable or disable Line Preselection.
V (8) to enable or disable the vibrator. W (9) to enter Wireless Test Mode, then
1for signal strength
2for voice quality
3for matching radio module and slot number
#to enter Local Test Mode.
5.Press Oto exit.
!
CAUTION:
The MDW 9030P handset is a radio device and, like all radio devices, should not be placed next to a pacemaker. See "Guidelines for Safe and Efficient Operation" in MDW 9030P Wireless Pocketphone Installation and Use for more information.
PARTNER, MERLIN, and MERLIN LEGEND are registered trademarks of Lucent Technologies.
Lucent Technologies |
|
Comcode 107993149 |
|
Issue 2, March 1997 | Copyright © 1997 Lucent Technologies |
- 4 -