Lucent Technologies 8403 manual How to Use the Feature Directory

How to Use the Feature Directory

The Feature Directory, shown in Figure 3, provides a convenient quick reference list for 12 features.

Press Feature then

dialpad button.

F1 F 2 F 3 F 4 F 5

F6

a

	F 7
	F 8
	F 9
	F *
	F 0
	F #
b		c

Figure 3. The 8403 Feature Directory

If the entries for any of the Feature Directory positions are blank, your system manager may assign features to them. You can access these features by pressing Feature and then the

corresponding entry number, 1 through 9, or 0, or character,

*or #, on the dial pad.

For example, if the Send All Calls feature is assigned to F1, you would press Feature , then dial

1in order to use this feature. If you have programmed your home number on an Abbreviated Dialing button assigned to F*, you would press Feature and then press the * key on your dial pad whenever you want to use this AD button.

The red light next to Feature goes on steadily when the button is pressed in order to let you know that your dial pad is now in the Feature selection mode.

Most likely, the Feature Directory on your voice terminal has already been completed for you. However, if there are changes in feature assignments, you can remove the old Feature Directory card from behind the plastic cover, and write (or type) the new feature assignments on the blank Feature Directory located under the current one. For your convenience, the lines on the Feature Directory are spaced for typing.

Note: You are not limited to the 12 features shown on your Feature Directory. All other features available with your DEFINITY switch, the DEFINITY ECS, or with System 75 can be accessed by simply dialing a 1-, 2-, or 3-digit feature access code, without using Feature . Your system manager can supply those access codes for you.

7