Lucent Technologies 8411, 8403 user manual Series Voice Terminals Installation and User’s Manual

8400-Series Voice Terminals Installation and User’s Manual Do not Discard the Blank Designation Card Important User Safety Instructions Service Important Safety Warnings for Installation Additional Installation Warning Other 8400-SERIES Voice Terminals Documentation Using the RS-232-D Jack and AnalogAuxiliary Power Installing Your Voice TerminalDistance Limitations Desktop Installation General Notes for InstallationPage Routing channel For line cord Analog Adjunct jack RS-232-D jack Line jack Adjunct jack Expansion Handset Module jack Adjusting the 8405 and 8410 Voice Terminal Desktop Stand Adjusting the 8405 and 8410 Desktop Stand To wall-mount the 8403, 8405, and 8410 voice terminals Wall InstallationRemoving the Desktop Stand on the 8403, 8405, Placing the Voice Terminal onto the Wall Jack Mounting Studs Attaching Adjunct Equipment D6AP Important Notes for Using the RS-232-D Jack and Analog Adjunct Jack onTo connect your 8411 to the PassageWay PC To connect an Analog Adjunct toLocation of Buttons #9 and #10 on PassageWay and Analog Adjunct Status Indications onPassageWay Status PassageWay Status IndicationsGreen Light Red LightFor the 8403 Voice Terminal Labeling the Designation CardFor the 8405, 8410, and the 8411 Voice Terminals For the 8434DX Voice Terminal How to Label the Blank Designation CardTo label the designation card Programming Options on the 8411 Voice Terminal While on-hook, press Current setting Enable T/R Status Lamps or Other 8400-SERIES Voice Terminals Documentation Voice Terminal Quick Reference Guide Definity Communications System Generic 2 and System