Lucent Technologies 8434DX, 8403, 8411, 8410, 8405 Do not Discard the Blank Designation Card

Page 2

DO NOT DISCARD THE BLANK DESIGNATION CARD

The voice terminal is shipped with a blank button designation card in place under the transparent cover. Do not discard this button designation card. Instead, place the preprinted designation card over the blank button designation card which comes with the voice terminal. This blank designation card can then be used as a substitute if, in the future, there are changes in features, telephone numbers, or extension assignments on the voice terminal.

ENVIRONMENTAL INFORMATION

In accordance with international environmental standards, parts of this Lucent Technologies voice terminal have been manufactured with recyclable plastic resins. These telephone parts have been marked >ABS< so they can be easily identified at recycling or waste recovery facilities when appropriate. The paper used in this documentation is also recyclable.

REFERENCES TO AT&T

Any references within this text to American Telephone and Telegraph Corporation or AT&T should be interpreted as references to Lucent Technologies Incorporated. The exception is cross- references to books published prior to December 31, 1996, which retain their original AT&T titles.

THE “CE” MARK

If the “CE” mark is affixed to this equipment, it means that it conforms to the European Union Electromagnetic Compatibility Directive (89/336/EEC) and the Low Voltage Directive (73/23/ EEC).

WARNING

This is a Class A product as defined by EN55022:1998. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

RESPONSIBILITY FOR THE SYSTEM'S SECURITY

The system manager for each PBX system is responsible for the system’s security. Lucent Technologies does not warrant that this product is immune from or will prevent unauthorized use of common-carrier telecommunication services or facilities accessed through or connected to it. Lucent Technologies will not be responsible for any charges that result from such unauthorized use. Product administration to prevent unauthorized use is the responsibility of the system manager, and he or she should read all documents provided with this product to fully understand the features available that may reduce the risk of incurring unauthorized charges.

TRADEMARKS

DEFINITY, QUORUM, and PassageWay are registered trademarks of Lucent Technologies. IBM is a registered trademark of International Business Machines Corporation.

WARRANTY

All terms and conditions specified in the owner’s agreement with Lucent Technologies apply.

HEARING AID COMPATIBILITY

These voice terminals are Hearing Aid Compatible (“HAC”). In addition, some units have an “HAC” label on them.

Image 2
Contents 8400-Series Voice Terminals Installation and User’s Manual Do not Discard the Blank Designation Card Important User Safety Instructions Service Important Safety Warnings for Installation Additional Installation Warning Using the RS-232-D Jack and Analog Other 8400-SERIES Voice Terminals DocumentationDistance Limitations Installing Your Voice TerminalAuxiliary Power General Notes for Installation Desktop InstallationPage Routing channel For line cord Analog Adjunct jack RS-232-D jack Line jack Adjunct jack Expansion Handset Module jack Adjusting the 8405 and 8410 Voice Terminal Desktop Stand Adjusting the 8405 and 8410 Desktop Stand Wall Installation To wall-mount the 8403, 8405, and 8410 voice terminalsRemoving the Desktop Stand on the 8403, 8405, Placing the Voice Terminal onto the Wall Jack Mounting Studs Attaching Adjunct Equipment D6AP To connect your 8411 to the PassageWay PC Using the RS-232-D Jack and Analog Adjunct Jack onImportant Notes for To connect an Analog Adjunct toPassageWay and Analog Adjunct Status Indications on Location of Buttons #9 and #10 onGreen Light PassageWay Status IndicationsPassageWay Status Red LightFor the 8405, 8410, and the 8411 Voice Terminals Labeling the Designation CardFor the 8403 Voice Terminal To label the designation card How to Label the Blank Designation CardFor the 8434DX Voice Terminal Programming Options on the 8411 Voice Terminal While on-hook, press Current setting Enable T/R Status Lamps or Other 8400-SERIES Voice Terminals Documentation Voice Terminal Quick Reference Guide Definity Communications System Generic 2 and System
Related manuals
Manual 10 pages 40.06 Kb Manual 10 pages 10.87 Kb Manual 59 pages 21.58 Kb Manual 33 pages 12.06 Kb Manual 33 pages 60.25 Kb Manual 10 pages 42.22 Kb Manual 57 pages 63.59 Kb

8410, 8434DX, 8411, 8403, 8405 specifications

Lucent Technologies 8403 is a significant telecommunications switch that was primarily utilized in the late 1990s and early 2000s. It played a crucial role in the evolution of telecommunication systems, reflecting the rapid advancements in technology during that period. The 8403, part of the Lucent 8400 series, was known for integrating various features and capabilities that were vital for modern telecommunication networks.

One of the standout features of the Lucent 8403 was its advanced switching technology. Utilizing time division switching and digital signal processing, the device was capable of handling a large volume of calls simultaneously while maintaining high-quality voice transmission. This technology enabled efficient routing of calls and minimized the risk of dropped connections, which was a concern in earlier analog systems.

Another significant characteristic of the Lucent 8403 was its support for a wide range of telecommunications protocols. The switch was designed to facilitate both traditional telephone services and emerging digital services, including ISDN and Frame Relay. By accommodating both circuit-switched and packet-switched networks, the 8403 provided flexibility that major telecommunication providers demanded during that transition period.

The 8403 also featured enhanced signaling options, such as Common Channel Signaling System No. 7 (CCSS7), which allowed for improved call setup, control, and management. This feature significantly reduced the time it took to establish a call, thereby improving overall network efficiency.

Scalability was another key characteristic of the Lucent 8403. As telecommunication needs grew, service providers could expand their systems by integrating additional hardware and modules without requiring a complete overhaul of the existing infrastructure. This adaptability was crucial as demand for services fluctuated and as new technologies emerged.

Moreover, the switch was designed with reliability and redundancy features in mind. Its architecture included failover mechanisms that ensured continued operation even in the event of hardware failures. This reliability was essential for operators that required uninterrupted service delivery.

Lastly, the user-friendly interface of the Lucent 8403 provided simplified management and monitoring capabilities. System administrators could easily access performance metrics, troubleshoot issues, and manage configurations, facilitating more efficient maintenance and operations.

In conclusion, the Lucent Technologies 8403 played a transformative role in telecommunications infrastructure during its era. Its blend of advanced switching technology, protocol support, scalability, reliability, and user-friendly management tools made it a foundational component in the evolution of modern telecom networks. As a result, it served as a significant stepping stone toward the complex, integrated systems we see today.