Operational Instructions, Description of the Display

Caller ID Speaker Phone

V10M10_IM_EN_03232007

OPERATIONAL INSTRUCTIONS

Description of the Display

The JT-P531 features a three-line LCD. The top line displays basic information; the middle line shows the telephone number of the incoming call; and the bottom line displays the name of the caller. Also included on the display is helpful information such as:

•The word, “LOW” appears on the screen when the battery power is low.

•The word, “NEW” appears on the screen when there are new incoming calls.

•The word, “CALL#” indicates the total number of incoming calls received.

•Hour: Minute Morning/Afternoon Day/Month are displayed. For example: “10:15 AM 21/03” (Year is not displayed)

•If the time and date programmed into the telephone differ from the telephone company’s record, the telephone will automatically adjust to the service provider’s information when receiving calls.

•When there has been no operation on the telephone for more than 20 seconds, the LCD will only display the time and date, amount of received calls and amount of incoming calls.

•The JT-P531 can store up to 94 incoming calls. Once 94 calls have been received, the oldest call will automatically erase when a new call is received.

Basic Setup

Note: Please be sure the telephone lines are connected well and batteries or AC adapter are installed before starting setting.

1.HOW TO ENTER THE SETUP MODE

•Long Press (Approx. 4 seconds) [DIAL] to enter setup menu.

•The LCD display will appear as shown here, however, you must use [▲]or [▼]to select from the menu including Select Language, Local Area Code, Regional AC’s (Area Codes), and Date/Time Setting.

•Press [DEL] to exit setting manually

or it will exit automatically if no selection is made after 5 seconds.

2.SET DATE / TIME

•When the LCD displays “DATE / TIME”, press [DIAL] to enter this function.

•Press [▲] or [▼] to set the month.

•Press [DIAL] to confirm.

•Use the same procedure to set the day hour, and minute.

- 12 -