Caller ID Speaker Phone | V10M10_IM_EN_03232007 |
OPERATIONAL INSTRUCTIONS
Calling a Number from the Caller ID List
1.With the handset is on the hook, press [▲] or [▼] to find the number you wish to call.
2.Press [DIAL] once; the LCD will display “PICK UP OR ADJ,” (for a 10 digit number) or “PICK UP PHONE.” (for a 7 or 11 digit number).
3.Pick up the handset and the number on the display will automatically dial.
4.With the handset off the hook, press [▲]
or [▼] to find the number you wish to call.
5.Press [DIAL] once. For 7 and 11 digit numbers, the number will automatically dial. For 10 digit numbers, the phone will add the number “1” automatically as the first digit.
Storing One-Touch Memory
1.While the handset is on the hook, press [M1] or [M2].
2.The LCD will show “E1” or “E2.”
3.Press [STORE] to enter.
4.Input the number you wish to save.
5.Press [STORE] again to confirm.
Note: Press [DEL] to cancel the current number while entering.
Dialing from One-Touch Memory
1.Pick up the handset or press [SPEAKER].
2.Press [M1] or [M2] to dial the number automatically.
Storing Two-Touch Memory
1.While the handset is on the hook, press [STORE].
2.The LCD will display
3.Select and press the number from the keypad
4.Press [STORE] to enter
5.Input the desired telephone number
6.Press [STORE] to confirm and advance to Name Input mode.
7.Input the name using the letters on the phone keypad (For example, to enter
the letter “C,” press the number 2 three times).
8.Press [STORE] again to confirm.
Note: Press [DEL] to cancel the current number or name while entering.
- 16 - | www.jWIN.com |