Vintage Design Telephone with Caller ID | V10M10_IM_EN_09072007 |
OPERATIONAL INSTRUCTIONS
Flash Function
When in an office equipped with PABX, this telephone makes it easy to transfer calls
-Ask caller to wait and press the FLASH button once
-Dial the extension number of the recipient.
-When the party answers, just hang up the handset
-When the line is busy or nobody answers, press FLASH button again to re- connect with the caller
Mute Function
Holding down the MUTE button prevents the other party from hearing your conversation with other people on your side of the call until the button is released
IMPORTANT NOTE: To operate this unit, you must have “CALLER ID SERVICE” setup with your local telephone company. Some functions such as CALLER NAME INDICATION will only operate if such services are included in the user’s Caller ID program with the local telephone company.
Basic Instructions for Making a Phone Call
1.Remove the handset from base and listen for dial tone.
2.Listen for a dial tone to indicate that the phone is connected.
3.Dial the number you wish to call using the number pad.
Basic Instructions for Receiving a Phone Call
Telephone will ring to alert the user of an incoming call.
1.Lift the handset, hold earpiece to your ear and speak into the mouthpiece.
2.To hang up, return the handset to the base at the conclusion of call.
- 12 - | www.jWIN.com |