Recieving Caller ID Information, Last Number Redial

Vintage Design Telephone with Caller ID

V10M10_IM_EN_09072007

OPERATIONAL INSTRUCTIONS

Recieving Caller ID Information

Note: Your Telephone Company must offer caller ID service in order for the caller ID function can be activated.

A.Incoming Call Display

- When there is an incoming call, the LCD will display the number, area code, name, time and date of the call.

B.Please note the following indicators:

•“UNAVAILABLE”

The call is made through a telephone company, which does not offer Caller ID service or does not transfer calls by long distance net

•“BLOCKED CALL”

Some areas allow the option for callers to prevent the telephone data from being displayed on others’ telephone. If you received such a call, “BLOCKED CALL” will be shown on LCD

•“Message Icon”

If you apply message service to your telephone company, LCD will display Message icon of post box when there is a message left. When you read this message, the message icon will disappear.

Reviewing the Caller ID List

-Press the ▲UP or ▼DOWN buttons to review the incoming calls (50 calls max.)

-Press the ▲UP or ▼DOWN buttons for more than three (3) seconds for quick review.

Erasing Data from the Caller ID List

-In the on-hook or off-hook state, press the ▲UP or ▼DOWN buttons to

select the wanted number, press the DEL button and the LCD will display “DELETE CALL?”, then press the DEL button again to confirm.

-Under on-hook or off-hook state, if press the DEL continuously more than three seconds, the LCD will display “DEL ALL CALLS?” Press the DEL button once more and the entire Caller ID list will be erased.

Calling a Number from the Caller ID List

-In the on-hook or off-hook state, press the ▲UP or ▼DOWN buttons to select the desired number.

-Press the DIAL button once, the number will be dialed out after two (2) seconds automatically. Press the DIAL button twice to dial the number out adding ‘0’ as the first digit.

Last Number Redial

The last outgoing number can be redialed automatically just by pressing the REDIAL button in the off-hook state. This is useful especially if the line is busy.

- 11 -