Lucent Technologies 8434DX manual To adjust ringer volume if necessary speaker is not active

3To set your selected ringing pattern:

if your 8434DX has a Shift button, press Shift when you hear the desired ringing pattern;

if your 8434DX has a Ring button, don’t press Ring anymore. You will hear the selected ringing

pattern two more times, and then it will be

automatically saved.

∙ You hear confirmation tone.

To adjust ringer volume if necessary (speaker is not active)

1To raise the volume, press the right half of the

Volume control button labeled ; to lower the volume, press the left half of the Volume control

button labeled .

SEND ALL CALLS

To send all calls (except priority calls) immediately to coverage

1While on-hook, press softkey below SAC (if shown on the display)

or Press Send Calls

or Dial Send All Calls access code _______.

To cancel Send All Calls

1While on-hook, press softkey below SAC (if shown on the display)

or Press Send Calls

or Dial Send All Calls cancel code _______.

SPEAKERPHONE

NOTE: To use this feature, your voice terminal must be set for the Speakerphone (speak and listen) feature.

To place/answer a call without lifting the handset, or to use speakerphone with any feature

1Press

Speaker

.

2Place or answer call, or access selected feature.

3Adjust speakerphone volume if necessary:

To raise the volume, press the right half of the Vol-

ume control button labeled ; to lower the vol- ume, press the left half of the Volume control button

labeled .

8