Geemarc PhotoPhone manual Setting up, Connecting the Telephone, Ringer Settings

Page 6

Setting up

1 - CONNECTING THE TELEPHONE

-Connect the handset cord.

-Open the battery compartment.

Insert 4 alkaline batteries without mercury (Type

AAA1.5V, not supplied) in the compartment (*). Bat- teries are required if you wish to increase the ringer level up to 10 dB.

Snap the battery door back in place.

- Connect the line cord plug to the line socket on the base (*).

Connect the other end of the line cord to the PTT socket. (*)

2 - RINGER SETTINGS

A switch located on the upper side allows the ringer to be switched HI,LOW,OFF:

: Off,

: Low,

: Hi

(*) Classified TNV-3 according to EN60950 standard.

6

Image 6

Contents PhotoPHONE Index Sommaire Description Reception volume Reception Tone Adjustment Setting up Connecting the TelephoneRinger Settings Setting up TONE/PULSE Switch T/P Time Break Recall TBR SwitchWall Mounting Wall mounting 80 mm Desk Support Tone and volume adjustment Receiving Volume and Tone AdjustmentVolume Sending Volume Level AdjustmentTone Making a Call Using the phoneAnswering Incoming Calls Last Number RedialRECALL, * & # Buttons Mute ButtonStoring Telephone Numbers Using the phone Dialing Stored Numbers General informations Recycling DirectivesDescription Description Raccordements Reglage DE LA SonnerieInstallation Multifrequences OU DECIMALE? T/P Montage MuralMontage mural Position Bureau Réglage du volume et de la tonalité Reglage DU Volume ET DE LA TONA- Lite DE ReceptionReglage DU Volume D’EMISSION Recevoir UN Appel AppelerRappel DU Dernier Numero Fonction Secret Memoriser UN Numero DE TelephoneUtilisation Appel D’UN Numero EN Memoire Informations générales