Geemarc PhotoPhone manual TONE/PULSE Switch T/P, Time Break Recall TBR Switch, Wall Mounting

Page 8

Setting up

3 - TONE/PULSE SWITCH (T/P)

The Tone/Pulse switch is factory pre-set to Tone position (T). In UK, all telephone exchanges now use Tone dialling. If your phone does not dial out, it is probably being used from an older private switch- board (PBX). In this case, theTone/Pulse switch must be moved to Pulse.

4 - TIME BREAK RECALL (TBR) SWITCH

For UK, the TBR switch should be set to 100 mS. It can be switched to 300 mS for other locations or PBX’s.

Note: If you are using your CL1100 with a hearing aid, set your hearing aid to “T” position.

5 - WALL MOUNTING

To wall-mount your telephone, slide out the clip, turn and slide back into the wall mounting position

8

Image 8

Contents PhotoPHONE Index Sommaire Description Reception volume Reception Tone Adjustment Ringer Settings Setting upConnecting the Telephone Setting up Wall Mounting TONE/PULSE Switch T/PTime Break Recall TBR Switch Wall mounting 80 mm Desk Support Tone and volume adjustment Receiving Volume and Tone AdjustmentTone VolumeSending Volume Level Adjustment Using the phone Answering Incoming CallsMaking a Call Last Number RedialStoring Telephone Numbers RECALL, * & # ButtonsMute Button Using the phone Dialing Stored Numbers General informations Recycling DirectivesDescription Description Raccordements Reglage DE LA SonnerieInstallation Multifrequences OU DECIMALE? T/P Montage MuralMontage mural Position Bureau Réglage du volume et de la tonalité Reglage DU Volume ET DE LA TONA- Lite DE ReceptionReglage DU Volume D’EMISSION Rappel DU Dernier Numero Recevoir UN AppelAppeler Fonction Secret Memoriser UN Numero DE TelephoneUtilisation Appel D’UN Numero EN Memoire Informations générales