INSTALLATION
Using the Belt Clip
The belt clip supplied allows you to conveniently carry the handset around.
Attach Belt Clip
Attach the belt clip to to the rear of the handset. Make sure the belt clip locks into place.
Remove Belt Clip
Insert a screw driver along the edge of one of the belt clip arms and release the clip. Lift the clip off the handset.
ADDITIONAL HANDSETS & BASES
Register a new Handset
Press to activate the menu
Use S and T to scroll through themenu to select
‘REGISTER’
Press OK
Use the keypad to type in your PIN (default 0000)
Press OK
Use S and T to scroll through the base number options. Select
the base number you require
Press OK
Press and hold PAGE on the base for more than 5 seconds. When
the LED lamp on the base starts to flash , release PAGE
Press OK
Enter the telephone Authentication Code (AC). The AC is ‘0000’.
Press OK
Registration has been successful if the the handset number is displayed on the newly registered handset and you have been returned to standby
13 | 44 |