Geemarc MyDECT manual Personal Identification Number PIN Settings, ‘Pin Change’

Page 22

HANDSET SETTINGS

Personal Identification Number (PIN) Settings

The PIN is required for the following options:

•Registering a new handset

•Resetting a handset

•Changing settings found under the base menu

The PIN is pre-set to ‘0000’. This can be changed – this is recommended for confidentiality.

Press to activate the menu

Use S and T to scroll through the menu to select

‘PIN CHANGE’

Press OK

Use the keypad to type in the current PIN (if you enter an incorrect

PIN, the telephone returns to standby mode)

Press OK

Use the keypad to type in the new PIN. The range is 0000 – 9999

Press OK

Use the keypad to type in the new PIN again for confirmation

purposes.

Press OK to save the new PIN and return to standby

21

PHONE BOOK

Telephone numbers can be stored in the phone book.

The phone book can contain 10 entries. Each phone number can contain up to 24 digits.

Create a Phone Book Entry

Press to activate the menu

Press OK to select ‘STORE PHONE’

Use S and T to scroll through the 10 phone book memory

locations (0-9) until you find the required entry

Using the keypad, enter the desired number (up to 24 digits)

Press OK to save the number and return to standby

Note: Use C/R to correct a mistake. C/R will clear the last digit entered. To clear all digits, press and hold C/R, then enter the correct number.

Insert Pause

Inserting a pause provides a delay of 3 seconds. This is necessary with some telephone systems.

To insert a dialling pause between numbers when storing a number, press until P appears in the LCD display.

36

Image 22

Contents MyDECT Contents Recycling DirectivesGuarantee Caller DisplayIntroduction Please note The guarantee applies to United Kingdom onlyMyDECT Safety Information Unpacking the TelephoneGeneral Description TroubleshootingDescription Handset DescriptionBase Description General ChecksRestore Factory Settings ‘HS RESET’Additional Handsets & Bases Other Optional AccessoriesLCD Screen Description Call Transfer between Handsets LCD Screen NavigationReceive an Internal Call Internal CallsMake an Internal Call Menu MapRelease a Handset InstallationLocation ‘BASE MENU’Select a Base Setting UpBattery Use BASE’‘REGISTER’ Using the Belt ClipRegister a new Handset Attach Belt ClipHandset Settings On/Off Settings‘RING’ Ringer SettingsCall by Call Delete a Call by Call EntryModify a Call by Call Entry Ringer Volume‘RING LEVEL’ VIP Ringer Tones Dialling using Call by Call‘VIP RING’ ‘KEY BEEP’ Key Tone Settings Create a Call by Call Entry Insert Pause‘DIAL MODE’ Dialling Mode T/PPhone Book Modify a Phone Book EntryView Phone Book Entries Dialling using a Phone Book EntryTime Setting ‘TIME SET’‘PIN CHANGE’ Personal Identification Number PIN SettingsCreate a Phone Book Entry ‘CLR Call LOG’ Caller Display‘CALL LOG’ CODE’DIAL’ Smart Dialling SettingsDial a Number from the Caller Display List Caller Display Settings View Caller Display ListPre-Dialling Using the TelephoneMaking a Call To Deactivate a Call Barring NumberMute Function Call BarringReceiving a Call To Activate a Call Barring NumberRecalling Recent Numbers Receiving VolumeLast Number Redial Key Lock‘CLR REDIAL’