RADIO ALARM CLOCK OPERATE
The radio has 2 wavebands: Medium Wave (AM) and VHF (FM). A built in aerial is incorporated for Medium Wave reception. For VHF reception, the thin lead should be unwound and fully extended. Adjust the position of the lead for best results.
On this unit the Volume control and Tuning control are located at the right hand side.
The buttons for operating radio (AM/FM and Radio/Off/Auto) are located at the left hand side.
SET THE RADIO
-Set the radio Radio / Off / Auto switch to the Radio position, the AM / FM switch to the desired waveband and adjust the Tuning control to your choice of programme. Adjust the Volume control as required.
-To switch the radio off, slide the Radio / Off / Auto switch to the Off position.
SET THE ALARM TIME
Press and hold down the Alarm Set button and set the alarm time by using the Hour and Minute buttons to set the clock.