SETTING UP
CLOCK TIME SETTING
The correct time should be set as follows:
-Press and hold down Time button.
-Whilst holding down the Time button, press Hour and then Minute buttons as necessary to display the correct time.
Note: that the clock is a 12 hour clock; in the case of PM, an indicator will show to the top left of the clock display.
RINGER SETTING
A switch (Ringer) located on the rear of the base unit allows the ringer to be switched On or Off.
If you do not wish the telephone to ring, set the switch to the Off position. The ringer lamp will still flash on receipt of a call.
Outgoing calls can still be made when the switch is set to the Off position.
DIMMER SETTING
A switch (Dimmer) located on the left side of the base unit allows to adjust (Hi or Lo) the brightness of the display.