Geemarc AMPLI500 manual Using the Telephone, Answering a Call, Making a Call

Page 16

USING THE TELEPHONE

Answering A Call

During an incoming call, your phone will ring and then the number and/or the name of the caller will be displayed on the screen, if you have subscribed to a Caller I.D. service via your telephone provider.

Using the handset

Lift the handset and speak.

To end the call, replace the handset.

SPEAKER PHONE (hands free)

Your Ampli500™ allows you to speak hands free. When the phone rings, press SPKR. The caller’s voice will be heard through the loudspeaker and they will hear your voice via the micro- phone near the SPKR button. The speakerphone symbol will appear on the display.

To end the call, press SPKR again.

Using the inductive coupler for hearing aids

Turn your hearing aid to the ‘T’ setting. (Check with your audiologist or hearing aid manufacture to determine whether or not your hearing aid/s is equipped with T-Coils for the T-Setting).

Use the phone handset as usual but the inductive coupler will feed the incoming call directly into your hearing aid.

Note: users of digital hearing aids must make sure their aids have been programmed for use with

the ‘T’ setting.(check with your audiologist or hearing aid manufacturer to determine whether or not

your hearing aid/s are equipped with T-Coils for the T-Setting)

Making A Call

Using the handset

Lift the handset and when you hear the dialling tone, dial the number on the keypad.

To end the call, replace the handset.

Pre-dialling

Key in the required number without lifting the handset.

Use the C key if necessary to cancel and correct a wrong digit.

Lift the handset and the number will be automatically dialled.

To end the call, replace the handset.

SPEAKER PHONE (hands free)

Key in the required number without lifting the handset.

Use the C key if necessary to cancel and correct a wrong digit.

Press SPKR and the number will be automatically dialled. The speakerphone symbol will appear on the display.

When the call is answered, simply speak into the microphone located on the base

You can adjust the speaker level with the slide button located on the left side of your telephone.

To end the call, press the “SPKR” SPEAKER PHONE (hands free) button again..

16

Image 16
Contents Page Contents Introduction Unpacking the Ampli500Description Headset buttonSending volume adjustment Screen example On hook position Description Connection Installation Setting UpDesk Installation Wall Mount InstallationSettings Ringer VolumeAlarm and Ringer Settings Ringer TonesDate & Time Setting Dialing ModeDate Format Language Setting Hour FormatScreen Contrast Adjustment Auto On HookAuto Screen Sizing -DIMX--x Area and Long Distance Code Setting Answering a Call Using the TelephoneMaking a Call Switching between Speakerphone and Handset Call Time CounterLast Number Redial Recalling Recent NumbersDeleting Recent Numbers Mute FunctionFlash One Touch Memory KeysTo store a number Dialling stored NumbersOptional Accessories HeadsetShaker To use the headsetVolume and Tone Sending Level AdjustmentReceiving Volume and Tone Adjustment Amplification over ride switchPhonebook Create a Phonebook EntryCreate an Entry from the Caller I.D. Display Log Make a call from a Phonebook EntryDelete a Phonebook Entry Modify a Phonebook EntryCaller I.D. Display LOG Use a Number from the Caller I.D. Display LOGCaller I.D. Display Delete a Number from the Caller I.D. Display LogDelete all Numbers from the Caller I.D. Display Log Call WaitingCall Waiting in Practice NEW CALL/MESSAGE LED Message Waiting LEDTroubleshooting Safety Information CleaningGeneral EnvironmentalRegulatory Compliance Guarantee