Geemarc AMPLI500 manual Ringer Volume, Ringer Tones, Alarm and Ringer Settings

Page 10

SETTINGS

Ringer Volume

The ringer volume can be adjusted as high as 95 +dB.

A switch located on right side allows the ringer to be switched to OFF, LOW, HIGH. Your telephone comes with the ringer switched to ‘High’.

Ringer Tones

Press MUTE

Use ▲ or ▼ to select ‘SET PHONE’

Press OK

Use ▲ or ▼ to select ‘SET RING’

Press OK

Select desired ring tone. Use ▲ or ▼ to scroll through and listen

to the 4 tones available

Press OK to select desired ring tone

Press C three times to exit or do nothing for 20 seconds and

the ring type will automatically be saved ready for the

next incoming call

Alarm and Ringer Settings

A 3-position switch located on the right side of the phone allows the settings below:

Ringer and strobe ﬂash are activated (Normal Setting)

The other two settings are only effective when an optional vibrator pad has been added.

Ringer, shaker and strobe ﬂash are activated

Ringer and shaker are activated

10

Image 10

Contents Page Contents Introduction Unpacking the Ampli500Description Headset buttonSending volume adjustment Screen example On hook position Description Connection Desk Installation InstallationSetting Up Wall Mount InstallationAlarm and Ringer Settings SettingsRinger Volume Ringer TonesDate & Time Setting Dialing ModeDate Format Language Setting Hour FormatScreen Contrast Adjustment Auto On HookAuto Screen Sizing -DIMX--x Area and Long Distance Code Setting Answering a Call Using the TelephoneMaking a Call Last Number Redial Switching between Speakerphone and HandsetCall Time Counter Recalling Recent NumbersFlash Deleting Recent NumbersMute Function One Touch Memory KeysTo store a number Dialling stored NumbersShaker Optional AccessoriesHeadset To use the headsetReceiving Volume and Tone Adjustment Volume and ToneSending Level Adjustment Amplification over ride switchPhonebook Create a Phonebook EntryCreate an Entry from the Caller I.D. Display Log Make a call from a Phonebook EntryDelete a Phonebook Entry Modify a Phonebook EntryCaller I.D. Display LOG Use a Number from the Caller I.D. Display LOGDelete all Numbers from the Caller I.D. Display Log Caller I.D. DisplayDelete a Number from the Caller I.D. Display Log Call WaitingCall Waiting in Practice NEW CALL/MESSAGE LED Message Waiting LEDTroubleshooting General Safety InformationCleaning EnvironmentalRegulatory Compliance Guarantee