Geemarc Jupiter 10 manual 00-04, 7 0 7 3 7 2 3, Dialling Numbers from Memory

Page 11

USING THE PHONE

will appear on the LCD display as you dial the digits.

-Press key once again.

-Press the M1, M2 or M3 keys (for storing the number into one of these locations) or the MEM key followed by a digit 0 to 9.

To change a number already stored in Memory: simply follow the above procedure, and the new number will replace the number stored previously.

NOTE: If you are using the unit with a PABX which needs you to wait for

an outside line, at step 3 always key in the /P key. The /P key inserts a 3 sec PAUSE when dialing. The display will show “P” followed by the number.

7 - DIALLING NUMBERS FROM MEMORY

- Lift the handset.

The LCD will display the call timer as follows for example:

00-04

-Press the memory location key (s) i.e. M1, M2, M3 or MEM followed by a digit

0 to 9.

The digits being dialled will appear on the LCD display at the same time. For example:

0 1 7 0 7 3 7 2 3 7

The call timer will start.

11

Image 11
Contents L e p h o n e Index Using the PhoneDescription Reglages SommaireDescription Description 05-18 Setting UPInstallation 16-45-302 3 4 5 6 7 8 Setting TimeTone / Pulse Switch T/P Setting the Ringer VolumeReceiving a Call Using the Phone00-18 Making a CallStoring Numbers in Memory ButtonMute Button Dialling Numbers from Memory 00-047 0 7 3 7 2 3 Guarantee GuaranteePage BIS/PAUSE Secret Description 00-00 InstallationReglage DE L’HEURE Interrupteur Tone / Pulse T/P Reglage DU Volume DE SonnerieRappel DU Dernier Numero Compose Touche BIS Utiliser LE TelephoneAppeler Repondre a UN AppelMemoriser UN Numero DE Telephone Touche RTouche Secret Appel D’UN Numero EN Memoire Appuyez de nouveau sur la toucheGarantie Garantie