SETTING UP
1 - CONNECTING THE TELEPHONE
1 - Connect the handset cord.
2 - Open the battery compartment by pulling back the latch.
3 - Insert correctly 4 x AAA 1.5V alkaline batteries (not supplied) in the battery compartment (*). Bat- teries are required if you wish to increase the ringer level up to 10 dB.
4 - Snap the battery door back in place.
5 - Connect the line cord to the socket (*).
2 - RINGER SETTINGS
A switch located on the upper side allows the ringer to be switched HI,LOW,OFF:
: Off,
: Low,
: Hi
(*) Classified
SETTING UP
Your phone comes with the ringer switched to «High» and the melody set to «6»:
|
| Low | Mid | High |
| Melody 1 | 1 | 2 | 3 |
| Melody 2 | 4 | 5 | 6 (by default) |
|
|
|
|
|
| Melody 3 | 7 | 8 | 9 |
|
|
|
|
|
If you don’t like the ringer melody, you can choose a new one by changing the settings as per instructions below:
-Lift the handset.
-Press 
button.
-Press # button.
-Press any of the 1 - 9 dial keys.
The new ringer settings will be activated with the next incoming call.
Note: The ringer level will be increased up to 10 dB if you insert batteries into the battery compartment.
6 | 7 |