Toshiba 32HL85 owner manual Connecting two VCRs, Connecting a camcorder

Connecting your TV

Connecting two VCRs

This connection allows you to record (dub/edit) from VCR1 to VCR2 while watching a videotape. You also can record from one TV channel with VCR1 while watching another TV channel.

You will need:

¥two coaxial cables

¥two sets of standard A/V cables

From
Antenna	VCR1 (plays)
		VIDEO AUDIO
		L R
IN from ANT OUT to TV		IN
CH 3		OUT
CH 4

TV upper back panel

TV lower back panel

VIDEO	AUDIO
L	R
IN from ANT OUT to TV	IN
CH 3	OUT
CH 4

VCR2 (records)

Connecting a camcorder

This connection allows you to watch video materials recorded on a camcorder.

You will need:

¥ one set of standard A/V cables

Camcorder	TV side panel
	(VIDEO-2 IN)

S-VIDEO VIDEO AUDIO

OUT

L

R

Note:

If you have VCRs with S-video, use S-video cables instead of standard video cables for better picture performance.

Do not connect the same VCR to the output and input jacks on the TV at the same time. To dub or edit, VCR 2 must select LINE IN, and the TV must select VIDEO 1.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Note:

¥If you have a camcorder with S-video, you can use an S-video cable instead of a standard video cable for better picture performance. Plug the S-video and standard audio cables into the ÒVIDEO-1 INÓ inputs on the upper back panel of the TV instead of the inputs on the side panel.

¥You can connect the camcorder to either set of VIDEO-2 IN terminals (on the side panel or upper back panel); however, do not connect devices to both sets of VIDEO- 2 IN terminals at the same time or the picture performance will be unacceptable.

14