Toshiba 32HL85 owner manual Connecting a DVD player or satellite receiver and a VCR

Connecting a DVD player or satellite receiver and a VCR

This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another channel.

You will need:

¥two (or three, if satellite receiver is used) coaxial cables

¥one set of standard A/V cables (between the TV and VCR)

¥one S-video cable (between the TV and DVD player/satellite receiver)

¥one pair of standard audio cables (between the TV and DVD player/satellite receiver)

From
Antenna		Stereo VCR
		VIDEO AUDIO
		L R
	IN from ANT OUT to TV	IN
	CH 3	OUT
	CH 4

TV upper back panel

TV lower back panel

AUDIO

OUT

L

R

S-VIDEO VIDEO

OUT OUT

DVD Player

AUDIO

OUT

L

IN from ANT

R

FromS-VIDEO VIDEO

OUT OUT

Satellite

Dish Satellite Receiver

Note:

¥For the highest possible picture quality from a DVD player or satellite receiver without component video, HDMI, or DVI, use an S-video cable. (If your DVD player has component video, see page 12. If your DVD player or satellite receiver has HDMI or DVI, see page 15.)

¥Do not connect the DVD player/satellite receiver and VCR to the same set of Video inputs on the TV. See the illustration, which shows the DVD player/satellite receiver connected to VIDEO 1 on the TV upper back panel, and the VCR connected to VIDEO 2 on the TV upper back panel. (Do not connect devices to both sets of VIDEO- 2 IN terminals at the same time or the picture performance will be unacceptable.)

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

11

E

F

S

Introduction

Connecting	yourTV
Usingthe	remotecontrol
Settingup	yourTV
UsingtheTVÕs	Features

Appendix

Index