Jabra CRUISER2 user manual LED indication, Grammed, Blue

USING THE FM TRANSMITTER WHEN VOICE ANNOUNCEMENT FUNCTION IS OFF

If voice announcement function is turned off you can select any of the pre-programmed frequency channels in the following order:

			LED indication
Chan-	Pre-pro-	(FM Frequency selection mode)
nel No	grammed	Battery	Call	Blue-	FM
	Frequency
				tooth
		status	status		status
				status
1	88..1 MHz	Off	Off	On
2	88..3 MHz	Off	On	Off
3	88..5 MHz	On	Off	Off
4	88..7 MHz	Off	On	On	Flash
5	88..9 MHz	On	Off	On
6	89..1 MHz	On	On	Off
7	89..3 MHz	On	On	On

To select the desired FM frequency channel, follow these steps:

-Connect your mobile phone and speakerphone..

-Press FM button to enter FM mode.. The default frequency channel is 88..1MHz

-Press the Volume Up or Volume Down button to move to the next/previous channel..

-Manually turn your radio into the same FM frequency and you are now ready to transmit calls or music from your phone to your car stereo..

Note 1: While changing frequencies the FM Status Icon flashes every 1 second..

Note 2: While changing frequencies, a repeated beep-tone will be heard and frequencies can be recognized by the combinations of Status Indicators.. (See the table above..)

SOFTWARE UPGRADE

It is possible to upgrade the speakerphone software.. Go to www..jabra..com and follow the instructions..

english

Jabra CRUISER2 12