Connecting with Your Phone, Manual pairing mode

2 Set your Bluetooth phone to ‘discover’ the Jabra CRUISER2

-Follow your phone’s instruction guide.. First make sure that Bluetooth is activated on your mobile phone.. Then set your phone to discover the speakerphone.. This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device..*

3 Your phone will find the Jabra CRUISER2

-Your phone will find the speakerphone under the name “Jabra CRUISER2”..

-Your phone then asks if you want to pair with the speakerphone.. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros).. Your phone will confirm when pairing is complete..

english

CONNECTIVITY

MobilSurf

BLUETOOTH

Infrared port Wap options Synchronization Networks

SELECT

DEVICES FOUND

Jabra CRUISER2

SELECT

Jabra CRUISER2

Passkey:

****

HANDSFREE

Jabra CRUISER2 added.

The handsfree is now ready for use

SELECT

Manual pairing mode

If you wish to use the speakerphone with a different phone, or if the pairing process was interrupted, you can manually set the speakerphone to pairing mode..

Turn the speakerphone on.. Press and hold the answer/end button for approximately 5 seconds until “pairing mode” is announced.. Then repeat steps 2.. and 3.. in the above pairing guide..

CONNECTING WITH YOUR PHONE

Pairing is only needed the first time a speakerphone and a phone are used together.. When the speakerphone and phone have been paired once, they will automatically connect when the speakerphone is on and Bluetooth is activated on the phone.. The speakerphone can be used when it is “connected” to the phone.. If the devices are paired, but do not immediately connect, tap the answer/end button..

Jabra CRUISER2

* Phone dependent