Grandstream Networks Handy Tone 386 user manual Syslog Level Pstn Access Code

Page 25

HandyTone-386 User Manual

Grandstream Networks, Inc.

Syslog Level

PSTN Access Code

Select the ATA to report the log level. Default is NONE. The level is one of DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the following events:

•product model/version on boot up (INFO level)

•NAT related info (INFO level)

•sent or received SIP message (DEBUG level)

•SIP message summary (INFO level)

•inbound and outbound calls (INFO level)

•registration status change (INFO level)

•negotiated codec (INFO level)

•Ethernet link up (INFO level)

•SLIC chip exception (WARNING and ERROR levels)

•memory exception (ERROR level)

The Syslog uses USER facility. In addition to standard Syslog payload, it contains the following components:

GS_LOG: [device MAC address][error code] error message

Here is an example:

May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000] Ethernet link is up

Default is “*00”. By pressing the code, user can switch the phone connected to ATA to PSTN and call out using PSTN. User can change this access code in the configuration. This is very useful for “911” calls when emergency happens.

6.2.4Saving the Configuration Changes

Once a change is made, users should click on the “Update” button in the Configuration page. The HandyTone-386 will then display the following screen to confirm that the changes have been saved.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents For SW Release Version HandyTone-386Table of Contents Welcome Interconnection Diagram of the HandyTone-386 InstallationGrandstream Networks, Inc Safety Compliances What is Included in the PackageWarranty Product Overview Key FeaturesModel HandyTone-386 Hardware SpecificationGet Familiar with Voice Prompt Basic OperationsCalling phone or extension numbers Make Phone CallsDirect IP calls Input MeaningAttended Transfer Voice Prompt with option 47, thenCall Features Table Call Features5 3-way Conferencing Send and Receive Pstn Calls Through Pstn Line PortLED Light Pattern Indication FAX SupportPstn Pass Through / Life Line Configuring HandyTone-386 WAN IP through Voice Prompt Configuration GuideConfiguring HandyTone-386 with Web Browser Time Zone End User Password IP AddressDaylight Savings Time Registered Yes PPPoE Link Up disabled PasswordEnd User WAN IP Address Product Model HT386MAC Address Advanced User ConfigurationWAN IP Address Product ModelSIP Server Outbound Proxy SIP User ID Authenticate ID Admin PasswordAuthenticate Password Enable Call Features Send Dtmf Dtmf Payload TypeSend Dtmf Dtmf Payload Type General Misc. SettingsAdmin Password SIP Server Outbound Proxy Preferred Vocoder Grandstream Networks, Inc Grandstream Networks, Inc Grandstream Networks, Inc Saving the Configuration Changes Syslog Level Pstn Access CodeRebooting the HandyTone-386 from Remote Configuration through a Central ServerGrandstream Networks, Inc Upgrade through Http pending Software UpgradeUpgrade through Tftp Grandstream Networks, Inc Restore Factory Default Setting
Top Page Image Contents