Receiving data or fax calls
If you are expecting a data or fax call, follow these steps to put your phone in data mode.
1.Press 
or 
under [MENU].
2.Choose System>Data/Fax. on QCP 860 and QCP 1960 Thin Phones, press 8 4; on QCP 2760 Thin Phones, press 8 2.
3.Press 
or 
under [NEXT] to cycle through the settings.
4.Press 
or 
under [OK] when you see the setting you want.
–Off (the recommended setting) leaves the phone in standard mode. Incoming voice calls are always allowed. Incoming data calls are accepted if the network structure correctly identifies them to the phone.
–Fax for next call tells the phone to receive the next call in fax mode.
–Data for next call tells the phone to receive the next call in data mode.
User’s Guide for the QCP 860, 1960, and 2760 Phones | 55 |