TELEPHONE USAGE
SET UP/INSTALLATION
1.Connect the adapter. Plug the large part of the adapter into the wall outlet and the adapter tip into the jack at the rear side of the unit. Use the enclosed adapter.
2.Connect the telephone line cord.
a.To connect without an answering machine.
•Use the new line cord to connect the PHONE jack of your new phone to the modular wall jack.
b.To connect with an existing answering machine.
•Use the existing line cord supplied to connect the LINE jack of your answering machine to the wall modular line jack.
•Use the new line cord supplied to connect the telephone’s jack of your new phone to the PHONE jack of your answering machine.
•Set your answering machine to answer the phone after 2 or more rings.
3.Remove plastic insulator from the battery compartment located under the directory card to allow proper functioning of battery.
4.Place the unit on a flat table or mount it on a wall. If you desire to place it on a wall, use the wall mount bracket and short line cord supplied to accomplish the wall mounting.
4