After the adapter is connected, you can make the initial settings of the unit as indicated below.
1.[SET LANGUAGE] appears on the display. Press the REVIEW UP () button to select the language. E - English, F - French, S - Spanish, and then press the DIAL button to confirm the selection.
E
SET LANGUAGE
2.When [LCD CONTRAST] appears, press REVIEW UP () button to make the contrast darker or the REVIEW DOWN () button to make the contrast lighter.
2
LCD CONTRAST
3.When [SET AREA CODE] appears, use REVIEW UP () button and REVIEW DOWN () button to set your local area code.
- - -
SET AREA CODE
Use the REVIEW UP () button - to select digits 0, 1, 2,
Use the REVIEW DOWN () button - to move to the next digit.
When you are finished setting the local area code, press Dial.
4.When [SET LDS CODE] appears, press the REVIEW UP() button to select the long distance code ( 0, 1, 2,
1
SET LDS CODE
5.When [SET ACCESS CODE] appears, use the REVIEW UP () button or the REVIEW DOWN () button to set your access code. This Code can range from _ to 9. It used to obtain an outside line when using a PBX and some Centrex applications. This feature can be used with Caller ID and Memory Locations.
6.The time and date are automatically set when a caller ID (CID) number is received. The unit will keep the current time accurately, and is updated each time a CID number is received.
10