Cortelco 2200 instruction manual Duration Counter, Mute Button, Automatic Memory

2.To Make A Call

a.Press and release the SPEAKERPHONE button.

b.When you hear a dial tone, dial the number or press an auto memory button. The numberwill appear on the display window.

c.When your party answers, adjust the sound level of his or her voice by sliding the VOLUME CONTROL located on the right side of the phone.

d.After the conversation has finished, press SPEAKERPHONE to hang up.

DURATION COUNTER

A built-in timer will start counting 6 seconds after you lift the handset or 6 seconds after you dial a telephone number.

MUTE BUTTON

Press MUTE to speak without the person on the phone hearing your conversation. The MUTE Indicator will light up and remain lighted until you resume your conversation. To resume your conversation, press MUTE. The MUTE indicator will go out and your call can continue.

AUTOMATIC MEMORY

To Store A Number In Memory:

1.Press the STORE button, [MEMORY STORING] appears on the display window.

2.Dial the telephone number (15 digits maximum) to store in memory.

Note: The memory locations can be chained together to store numbers of longer length.

3.Press STORE again.

4.Press the desired memory location.

•To store in an auto memory button (located on right-hand side of base) , press the memory button.

•To store in a keypad memory location - Press one of the keypad buttons (l, 2, 3, or 0).

5.Use the pull out memory index to write in the name and the memory button where it is stored.

13