Cortelco ez TOUCH instruction manual Telephone Features

Page 9

TELEPHONE FEATURES

PULSEANDTONEDIALING

1.If your telephone line accepts a touch-tone dialing, set the PULSE/TONE switch to the Tone position.

2.If your telephone line requires a rotary (pulse) dialing, set the PULSE/TONE switch to the Pulse position.

3.If you are unsure which system you have, set the switch to the TONE position. Lift the handset. When you get a dial tone, dial a telephone number. If the dial tone continues, move the switch to PULSE, and then dial the telephone number again.

RECEIVING A PHONE CALL

1.Be sure the RINGER switch is set to the HI or LOW position.

2.When the phone rings, lift the handset.

3.Set the Ringer switch to the OFF position when you do not want to be interrupted by the phone ringing. Remember to set the Ringer switch back to Hi or Low when you want to receive calls again.

PLACING A PHONE CALL

1.Lift the handset and wait for a dial tone.

2.Dial the telephone number you wish to call.

REDIALBUTTON

1.If the number you dialed is busy, or you want to call the last number dialed again, lift the handset, or press and release the hookswitch for a new dial tone.

2.Press REDIAL.

3.The last number called will automatically be redialed.

BRAILLERAISEDCHARACTERS

The braille raised characters on each key are a very important feature for the visually impaired.

VISUAL RING INDICATOR

The Indicator flashes when you have an incoming call.

DATAPORT

This is a connection which is in parallel with the telephone line. It allows the connection of a device such as a modem, Caller ID, or an answering machine.

7

Image 9
Contents OWNER’S Instructionmanual Ez Touch Table of Contents Importantsafetyinstructions Savethese Instructions Telephone Usage SET UP/INSTALLATIONWall Mount Instructions Telephone Part Identification Telephone Features Handset Volume Control RingervolumecontrolFlash Button StorebuttonMaintenance Information TelephoneserviceproblemsFCC Information TelephonerepairPage G, H IndexLimitedwarranty