FLASH BUTTON
If you have Call Waiting service, you can alternate the Call Waiting function per the following instructions.
1.While having a conversation, another party calls and you hear a tone.
2.Press the FLASH button once and release. The first conversation is placed on hold and the second call can be answered.
3.Press FLASH button again and release. The first caller can be spoken to again and the second call is placed on hold.
RINGERVOLUMECONTROL
The Ringer Volume switch allows you to turn the telephone ringer Off, or to set it to ring at Lo or Hi volume. You can dial or answer calls with the ringer off. Other telephones in your home will still ring; they are not affected by the switch.
HANDSET VOLUME CONTROL
This allows you to adjust the voice of the incoming call for your best listening level using the volume control switch on the side of your telephone.
STOREBUTTON
To store a number in memory, lift the handset and press the STORE button. Dial the number you wish to store and press the STORE button again. Next press the selected memory location button. The ezTouch telephone can store 13 different telephone num- bers, each up to 16 digits long. To store a “Pause” in memory, use the “Redial” button.
MEMO BUTTON
The MEMO button is used to dial stored numbers. To access this feature lift the handset, press the MEMO button and select the desired memory location
Note: The MEMO button is not used with
ONE-TOUCHPHOTOMEMORY
Allows you to store 3 numbers in our
TWO-TOUCH MEMORY
Ten telephone numbers can be stored in standard speed dialing locations. You can dial any of these numbers by pressing memo and then the desired memory location
ERASING NUMBERS IN MEMORYLOCATIONS
To remove a number from a memory location, lift the handset, press the STORE button and select the desired memory location that you wish to clear.
8