Operating Your Telephone
E
N G L
Editing Entry from Caller ID to Phone Book
Entries can only be edited while in Caller ID mode. Once the entry has been transferred to the PhoneBook, the entry will need to be deleted and resaved.
To edit and save:
1.Press PROG. The screen will display
SAVE PHONE BOOK, USE ENTER TO END.The cursor will be active and the name and number can be edited.
2.Press ENTER. It will briefly flash ENTER NAME, then it will list the name as it appears in CID, and the cursor next to it - you can edit it at this point. Press DEL to backspace until you get to where you want to start changes, and then complete the name. Repeat the procedure for editing the number.
3.After editing is complete and you are happy with both number and name press ENTER, the entry will then be saved in the PhoneBook.
Deleting Entries
To delete the entry viewed:
1.Press the DEL button.The screen will display DELETE?.
To delete all entries:
1.Press and hold the DEL button for four (4) seconds.
2.DELETE ALL will appear on the screen.
3.Press DEL again to confirm action. The message NO CALLS will be displayed after deleting all items in the call list.
If calls are not deleted and the memory becomes full, the oldest call data will be lost and the new call saved.
VOICE MAIL AND MESSAGE WAITING OPERATIONS
The Clarity 510 will work in conjunction with Voice Mail or Message Waiting serv- ices.
IMPORTANT:You must subscribe to a Voice Mail or Message Waiting service from your local telephone company to utilize this feature.
The ENTER/DIAL button will flash BLUE and the screen will display the message MESSAGE WAITING to indicate a new mes- sage is waiting.
To quickly retrieve messages, the access number should be programmed into the telephone. Refer to Voice Mail Number storage in the Setup Menu (see page 12) for instructions.
I
S
H
2. Press DEL again to confirm
action.21