SETTING A NEW SECURITY CODE FROM THE BASE
1.Place the cordless handset close to the base unit.
2.On the base unit, press and hold the MUTE and HOLD buttons simultaneously for at least two seconds. The MUTE and HOLD indicators blink and SET SECURITY is displayed.
3.On the cordless handset, press and hold the 2 and 8 keys simultaneously for at least 2 seconds. SET SECURITY is displayed again.
•If the transmission is successful, the base unit beeps in confirmation.
•If the transmission is not successful, it times out after 30 seconds and a
| PROG |
| NEW CALL |
| FORMAT |
|
|
|
| ||
| DOWN |
| UP |
| |
| DIAL | REVIEW |
| DELETE | |
| M1 |
| M2 |
| M3 |
| HANDSET | REDIAL/ | MEMORY | FLASH | |
| VOLUME | PAUSE |
|
|
|
| 1 |
| ABC2 |
| DEF3 |
| GHI4 |
| JKL5 | MNO6 | |
| PQRS7 |
| TUV8 | WXYZ9 | |
VOICE MAIL | TONE* | OPER0 |
| # | |
CHARGE IN USE |
| ||||
| MUTE |
|
|
| HOLD |
PAGE/INTERCOM |
| SPEAKER |
|
|
MUTE indicator | HOLD button |
MUTE button | HOLD indicator |
28