Teledex manual Features, Unpacking Your B100, Desktop Installation, Wall Mounting

1.FEATURES

The Teledex B100 is a single-line telephone with a compact footprint and basic functionality that is ideal for non-critical areas that do not require multiple lines or displays.

Your B100 has these useful features:

1.1FLASH – Sends an electronic hook-switch signal for use with special phone services such as call waiting

1.2LAST NUMBER REDIAL – Lets you quickly dial the last number dialed.

1.3MUTE – Mutes the handset microphone.

1.4HANDSET VOLUME CONTROL – Lets you control the volume of the sound you hear through the handset.

1.5DATA PORT – For connecting an additional phone, laptop/desktop computer or fax/answering machine to the B100 on the same line.

1.6HEARING AID COMPATIBLE

The B100 is ETL listed to UL standards and meets all applicable FCC standards and requirements.

2.UNPACKINGYOURB100

Inside the box, you will find all of the items needed for installation, as shown below:

3.INSTALLATION

3.1DESKTOP INSTALLATION

1)Plug one end of the handset coiled cord into the handset. Plug the other end of the cord into the handset jack located on the left side of the phone base. (Refer to figure 3.)

2)Place the handset in the handset cradle.

3)Plug one end of the supplied line cord into the LINE jack on the bottom of your phone. Then route the line cord through the left slot of the desk/wall mount bracket.

4)Plug the other end of the modular cord into the wall jack.

FIGURE 3

3.2WALL MOUNTING

1)Plug one end of the handset coiled cord into the handset. Plug the other end of the cord into the handset jack located on the left side of the phone base (please refer to figure 3.)

2)Place the handset in the handset cradle.

3)Remove the desk/wall mount bracket from the bottom of the B100. Rotate the bracket 180º and re-install it into the four slots on the bottom of the B100.

4)Connect the short line cord into the LINE jack on the bottom of your phone. Connect the other end of the line cord to the line jack on the wall mount plate.

5)Slip the phone onto the wall plate jack, lining up the wall mounting holes, and then slide the telephone down so it is firmly in place.

FIGURE 2

Check to be sure that your package includes all the above items. If any items are missing or damaged, please contact the distributor where you purchased the phone.

FIGURE 4

2 3