Teledex A210S, A100 Included in Your Package, Connecting the Iphone a Series, Receiving a Call

INCLUDED IN YOUR PACKAGE

Handset	Line Cord
Base Unit	Clear Plastic Overlay
Coiled Handset Cord	User Guide

CONNECTING THE IPHONE A SERIES

1)Located on the left side of the iPhone (as the phone is facing you) is a modular

jack. Insert one end of the coiled handset cord into this jack (you should hear the coil cord click when properly inserted).

2)Insert the other end of the coiled handset cord into the modular jack on the handset.

3)Turn the telephone so the back panel is facing you. Insert either end of the line cord into the jack on the back of the telephone labeled LINE.

4)Insert the other end of the line cord into a telephone wall outlet jack.

5)Once your telephone is connected, remove the plastic overlay and place the paper face plate over the keys. Replace the plastic overlay by hooking the tabs on the overlay into the recessed slots located on both sides.

PLACING A CALL USING THE HANDSET

1)Lift the handset. The “LINE” LED will illuminate. (On two-line models, if both lines are inactive, line 1 will be activated. If one of the two lines is active, the inactive line will be activated.)

2)Listen for dial tone. Dial the desired number, or press an AUTO DIAL key to automatically dial a number.

3)To end the call, hang up by placing the handset back in the cradle.

PLACING A CALL USING THE SPEAKERPHONE

(APPLIES ONLY TO MODELS WITH INCLUDED SPEAKERPHONE)

1)With the handset in the cradle, press either the SPEAKER key or the LINE key (on two-line models, select either inactive LINE key). The telephone will go offhook on

the selected line with speakerphone active.

2.Listen for dial tone, and dial the desired number, or press an AUTO DIAL key to automatically dial a number.

3.To end the call, press the SPEAKER key.

RECEIVING A CALL

TO ANSWER A CALL USING THE HANDSET:

1.Lift the handset. On two-line models, if one line is already in use, the iPhone will automatically select the ringing line.

2.To end the call hang up the handset.

TO ANSWER A CALL USING THE SPEAKERPHONE

1.With the handset in the cradle, press the line key associated with the ringing line. The iPhone will asnwer the line selected with the speakerphone active. You may also:

2.Press the SPEAKER key. The iPhone will select the ringing line and answer with the speakerphone active.

NOTE: THE RED SPEAKER LED WILL INDICATE THAT THE SPEAKERPHONE IS ACTIVE.

1