2.If there is caller name in the CID record, the first 8 characters are displayed for you to edit. If no caller name is available, you will be prompted to enter a name.
3.Press 
OK 
to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name and try again.
4.Edit the number if necessary and press 
OK 
to save it.
The record is now saved into the phonebook. The original CID record in the call list will now show the new name that you have entered.
Deleting a CID record
While you are reviewing the CID record that you would like to delete,
1.Press 
DEL 
.
2.Press 
OK 
to confirm.
Deleting the entire call log
While you are viewing any CID record,
1.Press and hold 
DEL 
until you are prompted to confirm the action.
2.Press 
OK 
.
The call log is now empty.
LAST NUMBER DIALED
Viewing the last number dialled
Your phone stores the last external numbers dialled, up to 20 digits.
1.Press 
during standby. The last number dialled, if any, is displayed.
2.If a redial number matches a phonebook record, the phonebook name will be displayed instead. Press 
OK 
to view the number.
3.
turns on when the number consists of more than 12 digits. You can press 
OK 
to view the off page digits.
Storing a previously dialled number into phonebook
While you are reviewing a previously dialled number that you would like to save,
1.Press 
.
2.Use the number keys to enter the name. If you make a mistake, use
DEL
to do the editing. A name can contain up to 8 characters. If there’s already a phonebook record matching the number, that phonebook name will appear and you can edit it.
13