Sprint Nextel SP-515 Telephone Operation, Making and Receiving a Call, Changing the Channel

n Telephone Operation

MAKING AND RECEIVING A CALL

To make a call, lift the handset and press PHONE. When the PHONE indi- cator lights steadily and you hear the dial tone, dial a phone number or memory number (see “Memory Dialing” on Page 13).

Telephone Operation

Illustration of front of base

PHONE

Indicator

To answer a call if the handset is on the base, simply lift the handset and begin your conversation. Or, if the

handset is away from the base, press PHONE first. The PHONE indicator on the handset the IN USE indi- cator on the base light.

Note: If RINGER is set to OFF, you must press PHONE to answer a call.

To end a call, place the handset on the base or press PHONE The indicator turns off.

Notes:

²If you press PHONE to hang up and the phone does not disconnect, move closer to the base then press PHONE again, or place the handset on the base.

²If you want to make a call but the handset is out of the base’s range, the handset beeps twice. Move the handset closer to the base and try again.

SETTING THE HANDSET’S VOLUME

You can select any of three volume levels by repeatedly pressing VOL-
UME during a call. Three short beeps sound when the handset is at the
highest setting. If you press VOLUME again, the handset returns to the	Illustration of handset
lowest setting.

CHANGING THE CHANNEL

The SP-515 scans 25 channels (frequency pairs used between the base and the handset) and automatically selects a clear channel each time you make or receive a call.

If you hear other conversations or excessive noise during a call, press

CHANNEL on the handset to select a different channel.

	Illustration of handset
Note: If the handset is too far from the base, the channel might not change. Move	the base and try
again.

USING REDIAL

You can quickly redial the last number dialed. Simply lift the handset and press PHONE. When you hear the dial tone, press REDIAL.

Illustration of handset

11