Sprint Nextel 2422 Registration Handset Layout Enter Base ID Code, Antenna LCD Display, Select

Registration The Handset Layout

Enter Base ID Code

1. After charging the Handset, remove it from its Charge Cradle, the screen will display:

1

2

3

2. Press NEW, then enter the 15 digit Base Unit ID code, located on the underside of the Base Unit.

3. Press OK. The Handset will display:

PLEASE WAIT!!

4. Wait approximately 15 seconds. The Handset will display:

FOUND BASE

NOTE: Occasionally, it will take longer than 15 seconds for the Handset to find the Base Unit. This is normal.

If the Handset displays: BASE BUSY TRY LATER, this indicates that the system is in use. Wait until the Base Unit is in the idle (on hook) mode, and repeat step 2 to 4.

Congratulations! You can now enjoy the benefits of your multi-Handset system.

4 9

5 10

6 11

	7	12
	8	13
		14
		15
1.	Antenna	9. LCD Display
2.	Message Waiting Indicator	10. Select
3.	Earpiece	11. Off (Clear)
4.	Headset Jack (2.5mm)	12. Battery Compartment
5.	Scroll Keys	13. Billed Services
6.	On (Flash)	14. Intercom
7.	Dialing Key (0-9)	15. Microphone
8.	Handsfree Speakerphone

6 7