LED Indicator lights, Make a handset call

ABOUT YOUR PHONE

LED Indicator lights

Answering machine ON/OFF		Base unit’s speaker phone
indicator		indicator
1.	NO COLOUR - OFF	1.	RED - activated
2.	STEADY - ON	2.	NO COLOUR – Not
3.	FLASHES – Check messages		activated

Using/charging/ registering indicator

		1.	Steady - charging
			status
		2.	On/Off light - Talking
Memory FULL			status
Memory FULL		3.	Flash lighting -
indicator			registering status
1.	RED - FULL	4.	No color - standby
2.	NO COLOUR –		mode
	Messages can	Hands-free
	be added	Hands-free
		speakerphone button

Handset Locator button

Icons on your handset’s display

The top line shows the handset number. When you make a call it shows the dialled number, call duration and other icons as shown below.

Handset Number Call duration

Memory / store a number	Caller display
Battery level (3 bars fully charged)	Battery low
Ringer on	Ringer off
Speakerphone on	Antenna in range/out of range
Key pad locked	Intercom call to another handset
Connected to telephone line.	Use arrows to scroll left or right
Flashes – when incoming call or paged	Use arrows to scroll left or right
X appears – microphone muted

ABOUT YOUR PHONE

5 Making Calls

Note: OUT-OF- RANGE warning

You may be out-of-range with the BASE UNIT if you hear a warning tone or the sound becomes distorted. Either

1.Move handset closer within 20 seconds until the tone stops. Otherwise, your call may be cut off.

2.Reposition & reconnect BASE UNIT to a phone connection closer to where the handset will be used (an extension lead(s) for power & telephone line may be useful where necessary).

Make a handset call

1.Key number into telephone.

2.If necessary, press MUTE/DEL to clear single digit or Press & Hold MUTE/DEL to clear all digits

3.Press PHONE button to dial.

4.if necessary, press LAST NUMBER REDIAL button.

Note: If using the BASE UNIT to call:

1.Press SPEAKERPHONE button to get a dial tone.

2.Key number into telephone.

3.If necessary, press LAST NUMBER REDIAL button.

Answer a call

When the handset rings:

1.Press PHONE or SPEAKERPHONE button.

Note: Call timer - The call timer shows the duration of your current call on display.

End a call

1. Press PHONE or SPEAKERPHONE button. The symbol disappears from the display.

Last Number Redial (on handset)

To call anyone of the last 3 numbers dialed:

1.Press LAST NUMBER REDIAL/P button.

2.If necessary, press LAST NUMBER REDIAL/P button again, until you select your number.

3.Press PHONE button to dial.

Note: If using the BASE UNIT to call or use last number redial:

1.Press SPEAKERPHONE button to get a dial tone.

2.Press LAST NUMBER REDIAL/P button.

M5000 User guide.doc Page 7 of 20

M5000 User guide.doc Page 8 of 20