Oricom IP800 manual Base is full, Successful registration, Unsuccessful registration

Page 26

ADDITIONAL FEATURES

Registering a new handset

Each base can register up to 4 handsets. Each handset can register up to 4 bases. If you buy an additional cordless handset you need to follow these steps.

1.Press the MENU key.

2.Select ADVANCED SET and press the OK key.

3.Select REGISTRATION and press the OK key.

4.Before you enter the PIN, press and hold the PAGING key on the base for 4 seconds.

The base is full

You can register up to 4 handsets to the same base. After registering 4 handsets to the same base, your base is full. If you want to register an additional handset, you have to un-register one of the handset. See Un-registering a handset for more detail.

5.Enter the PIN (The default pin code is 0000) and press the OK key.

Successful registration

You will hear a confirmation tone if the registration is successful. The handset label, the handset number, and the clock will be displayed.

Unsuccessful registration

If the registration is not successful, the handset registers back to its original base unit, or SEARCHING is displayed if it has lost link with its original base, or UNREGISTER is displayed if it is registering for the first time. Follow the procedure and try again.

Selecting a Base

If your handset is registered to more than 1 base, you can select which base the handset will use.

1.Press the MENU key.

2.Select ADVANCED SET and press the OK key.

3.Select BASE SELECT and press the OK key.

4.Select the base to use and press the OK key.

Un-registering a handset

A handset can un-register another handset registered to the same base. It cannot un-register itself.

1.Press the MENU key.

2.Select ADVANCED SET and press the OK key.

3.Select DELETE HS and press the OK key.

4.Select the handset you would like to un-register and press the OK key.

5.Enter the PIN (The default pin code is 0000).

6.Press the OK to confirm.

Changing PIN

A PIN (personal identification number) code is required to access the registration, delete handset, and reset mode.

The default PIN code is 0000. You can change it to a unique code of your own. A PIN code can be up to 8 digits long.

1.Press the MENU key.

2.Select ADVANCED SET and press the OK key.

3.Select CHANGE PIN and press the OK key.

4.Enter the current PIN and press the OK key.

5.Enter the new PIN and press the OK key.

6.Repeat the new PIN.

7.Press the OK to confirm.

Unsuccessful change

You will hear a reject tone if the new PIN is not repeated correctly. Follow steps 3 to 7 and try again.

Page 26 of 31

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Oricom IP800 Contents Appendix Environment and safety Environment and SafetyPack Contents Setting UP Your Phone Private Shared Setting up your phone Setting up the handsets and the baseSetting up your PC Check Use only preferred devices checkbox Adjusting the speaker volume on your PC Double click on Sounds and MultimediaSet your handset’s clock Configuring your Skype PhoneRegistering your handset Making Calls Entering a pause Second Calls Caller idTurning off the ringer Second outgoing callHands free calls Adjusting the volume of the caller’s voiceSpeak to someone privately when you are on a call Still can’t find the most comfortable level?Memory full Using Your PhonebookStoring Entries Duplicate nameCopy Your Entries How much space is still available in my phonebook? Order of display Call RecordsFinding out who called you Call List Matching your phonebook recordFinding out who you have called Dialled List Which messages are new messages? Skype FeaturesYou have new Voicemail Personalizing Your Phone Personalizing your phone’s displayPersonalizing your sounds Turning off your handset’s ringerSetting the alarm clock Extra FeaturesSetting the time When the alarm clock goes offPause Additional FeaturesRecall Baby callUnsuccessful registration Base is fullSuccessful registration Unsuccessful changeNot ringing? Transfer your call to another handset AppendixCall someone in the house Make a 3-way conference callSolutions Default SettingsTroubleshooting Problems REN RN for New Zealand Caller IDWarranty
Top Page Image Contents