Oricom BB200 Basic Operation, To Answer a Call, Making a Call, Using the HANDS-FREE Speakerphone

Page 7

BASIC OPERATION

Introduction

When the phone is in standby mode, the LCD displays the handset name. The battery icon reflects the current battery level and the signal icon indicates the handset is linked to the base.

TO ANSWER A CALL

∙When you receive a call, both handset and base will ring, the symbol appears on the display, and both the red led on the handset locator button and the big red led on the phone base will start flashing. If your cordless is directly connected to the telephone line (not via PABX) and the Caller Details Service has been activated by your server, the caller’s telephone number (if available) appears on the display.

∙Press the button to answer the call, the symbol will come up steadily on the display and the base red led with flash.

∙To end a call, press again the button, or alternatively replace the handset back in the base. The display symbol and the base red led disappear.

MAKING A CALL

∙Press button.

∙The symbol appears steadily on the display and the base red led starts flashing.

∙Check that the dial tone is present then key in the number.

∙The dialled number appears on the display.

∙To end the call, press again the button or alternatively replace the handset back in the base.

USING THE HANDS-FREE SPEAKERPHONE

The Hands-free function provides the convenience of talking to the caller without holding onto the phone and allows others in the room to be involved in the conversation.

To activate the speakerphone, press the X button when the handset is in standby mode or after having pressed the button to make or pick up a call.

The speakerphone is active if you can hear the callers voice coming from the speaker

and can see the X and the symbols on the display (hold repeatedly the Volume button to adjust the speaker volume). To switch back to normal mode from a speakerphone call, briefly press the X button.

- 7 -

Page 6 Page 8
Image 7
Page 6 Page 8
Contents User Guide Keep this user guide for future reference Contents Unpacking your Oricom BB200 Getting StartedHandset and Base unit Handset Display Guide Safety Information Replacing Batteries InstallationPower Supply Fitting BatteriesMaking a Call Using the HANDS-FREE SpeakerphoneBasic Operation To Answer a CallCall Duration Tiimer Adjusting the Earpiece VolumePRE-DAILLING Last Number RedialTo Lock the Keypad Handset Ringer VolumeHandset Ringer Melody To Mute the MouthpieceTurning OFF the Handset Ringer HOW to Take 2 Different Calls AT the Same TimeMessage Waiting Indication To Delete a Number from the Phonebook Memory Phonebook Memories and Caller IDMemories To Dial a Number from the Phonebook MemoryTo Check Caller ID Records Caller IDTo Delete a Caller ID Record To Return a CallTo Store a Caller ID Record 10 Memories Available Problems Solutions TroubleshootingCaller ID REN RN for New ZealandAustralia New Zealand WarrantyCustomer support
Top Page Image Contents