Teledex B120D manual Using the Data Port, Adjusting the Ringer Volume, Wall Mounting Clip

Page 7

5.3WALL MOUNTING CLIP

1)Located on the front of the telephone, above the speaker grill, is the wall mounting clip. Remove this clip by firmly pushing it upward, in the direction of the hook switch.

2)Rotate the clip 180º so that the side with the protruding edge is towards the top. This edge will hold the handset (please refer to figure 5.)

WALL MOUNTING CLIP

FIGURE 5

6.USINGTHEDATAPORT

The data port is located on the right hand side of the telephone, as it is facing you. Use this jack to connect a laptop or desktop computer, answering or fax machine in parallel to the same phone line to which the telephone is connected.

DATA PORT

FIGURE 6

7.ADJUSTINGTHERINGERVOLUME

Your B120D has three ringer volume levels: Off, Low and High. To adjust, slide the switch located along the right hand side of the telephone to the desired ringing level.

RINGING RING

VOLUME CADENCES

FIGURE 7

5

Image 7
Contents Users guide Contacting Teledex B120D Telephone DiagramTable of Contents Unpacking Your B120D FeaturesImportant Caller ID Information Important Notice Before InstallationFCC Statement Desktop Installation InstallationWall Mounting Adjusting the Ringer Volume Using the Data PortWall Mounting Clip Operation Dialing a Stored Number Using MuteCaller ID Storing a Number in MemoryDeleting Caller ID Records Message WaitingCaring for Your B120D Caller ID MessagesRequirements of Part 15 FCC Rules Requirements of Part 68- FCC RulesIndustry of Canada Requirements Important Safety Instructions