7.1 RING CADENCES
Your phone has three ring cadences, or patterns. To change the cadence, slide the switch located along the right hand side of the telephone to one of the musical notes icons located beneath the switch (please refer to Figure 7.)
8.OPERATION
8.1 PLACING AND ANSWERING CALLS USING THE HANDSET
To make a call, pick up the handset. When you hear the dial tone, dial the desired number. To answer an incoming call, pick up the handset or press the SPEAKER key. To end a call, place the handset back on the cradle or press the SPEAKER key again.
8.2 HANDSET VOLUME CONTROL
There are three (3) volume levels for the handset volume. To increase or decrease the handset volume, press the VOLUME UP or DOWN keys.
8.3 USING THE SPEAKERPHONE
To place or answer a call using the speakerphone, press the SPEAKER key. The SPEAKER indicator will light and the phone will go off hook.
To end a speakerphone call, press the SPEAKER key again. The SPEAKER indicator light turns off.
8.4 SWITCHING BETWEEN HANDSET AND SPEAKERPHONE
To switch from the handset to the speakerphone during a call, press the SPEAKER key, and place the handset on the base.
To switch from the speakerphone to the handset, lift the handset and the speakerphone will automatically turn off.
8.5 ADJUSTING THE SPEAKERPHONE VOLUME
There are three (3) volume levels for the speakerphone. To increase or decrease the speakerphone volume level, press the VOLUME UP or DOWN keys.
8.6 USING A HEADSET
Plug a standard 2.5 mm headset plug into the headset jack on the right hand side of the telephone. You may place and receive calls by pressing the SPEAKER key.
8.7 USING REDIAL
The redial function allows you to redial the number that was last dialed. Pick up the handset, or press the SPEAKER button, and press the REDIAL key. The number will be dialed automatically.
8.8 USING FLASH
The FLASH key supports feature such as call waiting. For example, if you have subscribed to call waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.
8.9 USING HOLD
To place a call on hold, press the HOLD key. The HOLD indicator flashes. You can now hang up the handset without disconnecting the call.
6