Handset Charge Cradle
1.Choose an area near an electrical outlet and place your cordless telephone on a level surface.
2.Plug the AC power converter into the electrical outlet and the DC connector into the jack on the back of the cradle.
3.Place the handset in the cradle. The CHARGE indicator turns on, verifying the battery is charging.
Allow handset to charge for 16 hours prior to first use. If you do not properly charge the handset, battery performance is compromised.
CAUTION: Use only the model
Telephone Operation
Power On/Off Operation
The handset is powered on by connecting the battery or if the handset has been powered down, press and hold the END CALL button for 2 seconds.
To power off the handset, press and hold the END CALL button for 2 seconds.
Note: If the handset is on the cradle, only the (speaker) and END CALL buttons are functional.
Registration
YOU MUST REGISTER THE HANDSET TO THE MAIN BASE
BEFORE USE! It is not recommended that handset be registered again unless absolutely necessary.
10