RCA 2-9750/2-9763 manual Desktop Installation, Raise the base antenna

DESKTOP 2

INSTALLATION 5

3

4 TONE/PULSE switch

If you don't charge the handset battery properly (for 12 hours) when you first set up the phone, performance of the battery will be compromised.

1.Remove the base plate on the bottom of the phone.

2.Plug the telephone line cord into a modular jack.

3.Plug the power supply cord into an AC outlet.

4.Set the TONE/ PULSE switch to TONE for touch-tone service, or PULSE for rotary service. If you don’t know which type of service you have, check with the phone company.

			1
			2
			3
			4
			5
			6
			7
			8
PHONE		CHANNEL	9
			0
1	ABC 2	DEF 3

PAGE / FIND

5.Raise the base antenna.

6.Turn on the RINGER switch so the handset rings for incoming calls.

7.Place handset in the base to charge for 12 hours. The CHARGE/ IN USE light comes on indicating that the battery is charging.

GHI 4	JKL 5	MNO6
PRS 7	TUV 8	WXY 9
*			CHARGE
	OPER0	#
TONE			IN USE
VOLUME MEMORY		REDIAL
RINGER		FLASH
OFF	ON

RINGER switch CHARGE/IN USE light

3