RCA 28300 setup guide Registration, Deregistration

Registration

Your handset is pre-registered and ready to use. It is not recommended that handset be registered again unless absolutely necessary.

From the HANDSET SETTINGS menu;

1.Use the 6 or 5 button to scroll to REGISTRATION.

2.Press the OK (SKL) button to enter the menu.

3.Use the 6 or 5 button to scroll to a specific base (1-4).

4.Press the OK (SKL) button.

5.While the system is searching, press and hold the PAGE button on base station for 2 seconds until the Charge/In Use indicator blinks.

NOTE: The maximum number of handsets that can be registered to a base, is six. The maximum number of bases to which a handset can be registered to, is four.

Deregistration

Deregistration cancels registration. During the deregistration process, keep the handset near the base.

From the HANDSET SETTINGS menu;

1.Use the 6 or 5 button to scroll to DE-REGISTRATION.

2.Press the OK (SKL) button to enter the menu.

3.Use the 6 or 5 button to scroll to a specific handset (1-6) and press the OK (SKL) button

4.Press the OK (SKL) button to confirm the selection. You will hear a confirmation tone when handset is deregistered.

WARNING: It is not recommended that a handset be deregistered unless absolutely necessary because once a handset is deregistered, that handset’s telephone features cannot be used until the handset is re- registered.

5.Select Back, if you do not want to deregister.

NOTE: When you complete the deregistration process, NOT REGISTERED shows on the display. To use the handset, you must register the handset.

22