USING TONE
SERVICES ON A
PULSE LINE
Some special services require tone signals (such as
1. Be sure PULSE/TONE is set to
PULSE.
2.Dial the service’s main num- ber.
3.When the service answers, press TONE. Any additional numbers you dial are sent as tone signals.
The phone’s dial mode resets to pulse when you make or receive a call.
ˆCaller ID Operation
If you subscribe to Caller ID ser- vice from your phone company, the phone company sends infor- mation about the call, as well as the time and date, between the first and second rings of every call you receive.
The phone displays this informa- tion when it receives a call, and it stores up to 60 Caller ID records for later review. It also shows if caller information is unavailable or if the name and number were blocked by the caller (see “Caller ID Messages” on Page 12).
If you subscribe to Call Waiting with Caller ID, 
flashes along with the Caller ID record for the new call. If you want to answer
the incoming call, press CALL BACK/FLASH. To resume the previ- ous phone conversation, press CALL BACK/FLASH again.
If the phone’s Caller ID memory becomes full, any new call replac- es the oldest call’s record.
REVIEWING CALLER ID RECORDS
To review the Caller ID records, repeatedly press ▲ or ▼. NEW-
XX
Caller ID Operation | 11 |