DIALING NUMBERS FROM A CALLER ID RECORD
To dial a number stored in a Call- er ID record, recall the record, then press CALL BACK/FLASH. PRESS TALK appears. If the area code of the received call is the same as the one you stored in the phone, the record does not show the area code. If it is differ- ent, the record shows the area code.
To dial the number as it appears on the display, simply press TALK.
If you need to add the area code and/or use 1+ dialing, repeatedly
pressuntil the required number appears.
For example, if you stored area code 817 into the phone and you received a call from
FLASH.
•5551234
•18175551234
•8175551234
•15551234
To stop dialing after the phone started to dial, press TALK again.
Note: If a Caller ID record does not contain a phone number (if it was blocked by the caller, for ex- ample) you cannot dial from that record.
DELETING CALLER ID RECORDS
You can delete Caller ID records individually or all at once.
To delete a single Caller ID record, repeatedly press ▲ or ▼ to recall the record you want to delete, then press ERASE. ERASE? appears, prompting you to confirm the deletion. Press
ERASE again. MESSAGE ERASED appears, indicating that the record was deleted.
To delete all Caller ID records, hold down ERASE for about 4 sec- onds. ALL ERASE? appears, prompting you to confirm the de- letion. Press ERASE to delete the records, or press TALK, ▲ or ▼ to cancel the deletion.
When you delete all Caller ID records, ERASED then NO CALLS appears.
Caller ID Operation | 13 |