Turning Auto Talk ON/OFF

Your phone is preset so you must press TALK when you lift the handset from the base to answer a call. With auto talk turned on, you can answer a call by just lifting the handset from the base. If the handset is away from the base, you can answer by pressing any key.

TALK

Follow these steps to turn auto talk on or off.

1.Lift the handset and press FUNC- TION. A menu appears with Auto Talk selected.

2.Press CH/SELECT to change the au- to talk setting. On or Off appears indicating the selected setting.

3.Return the handset to the base or press FUNCTION to store the new setting.

TURNING CALLER ID/ CALL WAITING ON/OFF

If you subscribe to Call Waiting with Caller ID service, you can set the ET- 1125 to show Caller ID information for an incoming call even while you are us- ing the phone.

Follow these steps to turn the Caller ID/ Call Waiting feature on or off.

1.Lift the handset and press FUNC- TION.

2.Press 2 or VOL/CID to select CI- DCW (Caller ID/Call Waiting).

3.Press CH/SELECT to change the Caller ID/Call Waiting setting. On or Off appears indicating the selected setting.

4.Press FUNCTION then return the handset to the base to store the new setting.

STORING YOUR

AREA CODE

You can store your local area code in the phone’s Caller ID record so it does not store the area code if the received call is from your local area. If for some reason you need to dial the area code (or store in the memory), you can add it afterwards. See “Adding/Deleting the Ar- ea Code” on Page 20.

Note: If your calling area requires 10- digit dialing including area code, do not enter the area code but leave this option blank.

Follow these steps to store your area code.

1.Lift the handset and press FUNC- TION.

2.Press 3 or VOL/CID twice to se- lect Area Code.