4.Snap the tabs at the wide end of the bracket into place.
5.Plug the modular cord into the wall plate jack. Align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
6.Plug the AC adapter into a standard AC outlet. The
7.Raise the base’s antenna to a verti- cal position.
CONNECTING AND CHARGING THE HANDSET BATTERY PACK
The
1.Press down and slide off the battery compartment cover.
2.Lift the battery pack out of the com- partment, and plug its connector into the socket inside the compartment. The connector fits only one way.
3.Put the battery pack in the compart- ment and replace the cover.
9